Optimization of Silicon Nanocomposite Anodes for High-Energy-Density Lithium-Ion Batteries
Keywords:
silicon-based anodes, lithium-ion batteries, nanocomposite anodes, electrochemical performance, industrial scalabilityAbstract
Lithium-ion batteries (LIBs) are vital for energy storage in applications like consumer electronics and electric vehicles. Silicon-based anodes offer high theoretical capacity, but challenges remain, including large volume expansion, low Coulombic efficiency, and short cycle life. Current strategies, such as nanostructuring and carbon hybridization, struggle to balance performance with scalability and durability. This study introduces a silicon-graphene-polyacrylic acid (Si/G/PAA) nanocomposite anode, integrating structural, interfacial, and processing innovations. The key advancement is the dual-phase confinement of Si nanoparticles using reduced graphene oxide (rGO) and crosslinked PAA, along with engineered mesoporosity to accommodate Si expansion and interfacial passivation via GO wrapping. The process is water-based and NMP-free, ensuring industrial scalability. The Si/G/PAA anode achieves an initial Coulombic efficiency of 83 ± 1% and 85 ± 2% capacity retention after 200 cycles at 3.5 mAh cm⁻² areal capacity. Full-cell tests with LiFePO4 cathodes at 45°C show over 80% capacity retention after 300 cycles. This work provides a scalable, high-performance anode solution, addressing key LIB challenges and demonstrating both academic and practical significance for future energy storage technologies.References
1. L. Sun, Y. Liu, L. Wang, and Z. Jin, "Advances and future prospects of microsilicon anodes for highenergydensity lithiumion batteries: a comprehensive review," Advanced Functional Materials, vol. 34, no. 39, p. 2403032, 2024. doi: 10.1002/adfm.202403032
2. Z. Ma, J. Zhu, F. Zeng, Z. Yang, Y. Ding, and W. Tang, "Structural Control and Optimization Schemes of SiliconBased Anode Materials," Energy Technology, vol. 11, no. 6, p. 2201496, 2023. doi: 10.1002/ente.202201496
3. H. Ahmed, G. S. dos Reis, P. Molaiyan, A. Lähde, and U. Lassi, "Silicon/carbon composite anode materials for lithium-ion batteries: materials design and synthesis, current state, progress, and future perspectives," Progress in Energy, vol. 7, no. 2, p. 022003, 2025.
4. L. Sun, Y. Liu, L. Wang, Z. Chen, and Z. Jin, "Stabilizing porous micro-sized silicon anodes via construction of tough composite interface networks for high-energy-density lithium-ion batteries," Nano Research, vol. 17, no. 11, pp. 9737-9745, 2024. doi: 10.1007/s12274-024-6937-2
5. F. Boorboor Ajdari, P. Asghari, A. Molaei Aghdam, F. Abbasi, R. P. Rao, A. Abbasi, and N. Mikaeili Chahartagh, "Silicon Solid State Battery: The SolidState Compatibility, Particle Size, and Carbon Compositing for High Energy Density," Advanced Functional Materials, vol. 34, no. 30, p. 2314822, 2024. doi: 10.1002/adfm.202314822
6. Z. Cheng, H. Jiang, X. Zhang, F. Cheng, M. Wu, and H. Zhang, "Fundamental understanding and facing challenges in structural design of porous Sibased anodes for lithiumion batteries," Advanced Functional Materials, vol. 33, no. 26, p. 2301109, 2023. doi: 10.1002/adfm.202301109
7. Z. Zhang, K. Zhang, Y. Li, Z. Li, C. Wu, and J. H. Pan, "Engineering Nanostructure, Interface, and Prelithiation of Advanced Silicon-Based Lithium-Ion Battery Anodes," Energy Material Advances, vol. 6, p. 0175, 2025. doi: 10.34133/energymatadv.0175
8. L. Zhong, Y. Sun, K. Shen, F. Li, H. Liu, L. Sun, and D. Xie, "Poly (Acrylic Acid)Based Polymer Binders for HighPerformance LithiumIon Batteries: From Structure to Properties," Small, vol. 20, no. 51, p. 2407297, 2024.
9. G. F. I. Toki, M. K. Hossain, W. U. Rehman, R. Z. A. Manj, L. Wang, and J. Yang, "Recent progress and challenges in silicon-based anode materials for lithium-ion batteries," Industrial Chemistry & Materials, vol. 2, no. 2, pp. 226-269, 2024. doi: 10.1039/d3im00115f
10. B. Jin, L. Liao, X. Shen, Z. Mei, Q. Du, L. Liang, and J. Du, "Advancement in Research on Silicon/Carbon Composite Anode Materials for Lithium-Ion Batteries," Metals, vol. 15, no. 4, p. 386, 2025. doi: 10.3390/met15040386
11. C. Xu, P. Jing, H. Luo, W. Cai, H. Wu, Q. Wang, and Y. Zhang, "Oriented tuning yolk-shell structure for well-confinement and constructing durability of silicon/carbon composite," Journal of Alloys and Compounds, vol. 942, p. 168955, 2023. doi: 10.2139/ssrn.4266827
12. J. Reslan, M. Saadaoui, and T. Djenizian, "Synthesis and Structural Design of Graphene, Silicon and SiliconBased Materials Including Incorporation of Graphene as Anode to Improve Electrochemical Performance in LithiumIon Batteries," Advanced Materials Interfaces, vol. 11, no. 19, p. 2301062, 2024. doi: 10.1002/admi.202301062
13. N. Nandihalli, "A review of nanocarbon-based anode materials for lithium-ion batteries," Crystals, vol. 14, no. 9, p. 800, 2024. doi: 10.3390/cryst14090800
14. S. A. Alomari, D. P. Dubal, J. MacLeod, and N. Motta, "Three-dimensional nitrogen-doped rGO-siloxene nanocomposite anode for Li-ion storage," Applied Surface Science, vol. 624, p. 157099, 2023. doi: 10.1016/j.apsusc.2023.157099
15. M. Zhang, T. Xu, L. Pan, S. Sun, T. Mei, Y. Qian, and N. Lin, "Is Microporous Carbon Confined Nano Si Composite the Best Anode Choice for HighEnergyDensity LithiumIon Batteries?," Small, vol. 20, no. 50, p. 2407124, 2024. doi: 10.1002/smll.202407124
